Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Functions of Main Parts of Lathe Machine
#1
A lathe machine is mainly composed of the following parts for completing operations such as CNC turning, drilling, facing, and more. What are parts of the CNC lathe and their uses?

Functions of Main Parts of Lathe Machine
Headstock Assembly: The headstock of a lathe machine is usually mounted on the machine's left side. The drive pulleys and gears are housed in this enclosure. This is where the chuck is attached to the lathe. The rotating motion is conveyed to the workpiece with the help of the chuck. Click on the following link for additional information: 


Cross Slide: The tool's cutting motion is provided by the cross slide. The Cross Slide can be operated manually or using cross-feed equipment. The cross slide is perpendicular to the lathe's center of rotation.

Chip Pan: Located at the bottom of the lathe machine, this pan collects chips. Its purpose is to gather chips as they are produced during the machining process. As a result, these chips may be readily gathered and removed.

Feed Rod: The feed rod is a power transmission system that allows the carriage to move precisely along its longitudinal axis. Movement of the feed rod is required for turning operations. In some lathes, feed may not be provided, hence the feed rod is replaced by a lead screw.

Lead Screw: Just below the feed rod is a lead screw. In addition, it allows the carriage to move in a precise longitudinal direction. It's in the business of cutting threads.

The bed is the foundation on which all of the lathe's components are mounted. In most cases, it is a single-piece cast iron part. Because of its self-lubricating properties, cast iron is employed. The size of the bed varies depending on the type of lathe machine.

Ways: Ways are the guide rails that allow different sections of the lathe machine to travel through them. It allows the carriage and other mounting parts to move with precision. There are two types of paths: inner and exterior.

Carriage: The carriage holds the tools and allows for transverse and longitudinal movement of the tool. For taper turning and facing, a cross feed is employed, while a longitudinal feed is provided by a normal turning carriage. Other components are included in the carriage. It can be found on the outskirts of the city.

When a lengthy task is tethered to the chuck, the tailstock is utilized to center the job. It offers adequate vibration dampening support. It's usually positioned on the inside of the doors.

Cross Slide The Cross Slide is a carriage-mounted slide. Its duty is to give tool crossfeed, and its movement is perpendicular to the lathe machine's center.

Compound Rest: The compound rest is a circular rest that is put up over the cross slide.
Reply
#2
Thanks for providing recent updates regarding the concern, I look forward to read more. Visit Website
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)